==> Creating chroot for [extra-staging-with-build-support] (i486)... -> Deleting chroot copy 'build'... -> Deleting chroot copy 'root'... ==> Creating install root at /var/lib/archbuild/extra-staging-with-build-support-i486/root ==> Installing packages to /var/lib/archbuild/extra-staging-with-build-support-i486/root :: Synchronizing package databases... build-support-manual downloading... build-support downloading... core-staging downloading... extra-staging downloading... core-testing downloading... core downloading... extra-testing downloading... extra downloading... resolving dependencies... :: There are 2 providers available for awk: :: Repository core-staging 1) gawk :: Repository core 2) gawk Enter a number (default=1): :: There are 2 providers available for sh: :: Repository core-staging 1) bash :: Repository core 2) bash Enter a number (default=1): :: There are 2 providers available for libisl.so=23-32: :: Repository core-testing 1) libisl :: Repository core 2) libisl Enter a number (default=1): looking for conflicting packages... warning: dependency cycle detected: warning: systemd-libs will be installed before its libcap dependency Packages (116) acl-2.3.2-1.0 archlinux32-keyring-20240131-5.1 attr-2.5.2-1.0 audit-4.0.2-1.0 autoconf-2.72-1.0 automake-1.17-1.0 bash-5.2.032-2.0 binutils-2.43+r4+g7999dae6961-1.1 bison-3.8.2-6.0 brotli-1.1.0-2.2 bzip2-1.0.8-6.0 ca-certificates-20240618-1.0 ca-certificates-mozilla-3.85-1.1 ca-certificates-utils-20240618-1.0 coreutils-9.5-2.2 curl-8.9.1-2.0 db5.3-5.3.28-5.0 debugedit-5.0-5.0 diffutils-3.10-1.0 e2fsprogs-1.47.1-4.0 fakeroot-1.36-1.0 file-5.45-1.1 filesystem-2024.04.07-1.0 findutils-4.10.0-2.0 flex-2.6.4-5.0 gawk-5.3.0-2.0 gc-8.2.6-1.0 gcc-14.2.1+r32+geccf707e5ce-1.0 gcc-libs-14.2.1+r32+geccf707e5ce-1.0 gdbm-1.24-1.0 gettext-0.22.5-1.0 glib2-2.78.4-1.0 glibc-2.40+r16+gaa533d58ff-2.1 gmp-6.3.0-2.0 gnupg-2.4.5-4.0 gnutls-3.8.7-1.0 gpgme-1.23.2-6.2 grep-3.11-1.1 groff-1.23.0-7.0 guile-3.0.9-1.1 gzip-1.13-4.0 iana-etc-20240814-1.0 icu-75.1-1.0 jansson-2.14-4.0 json-c-0.17-2.0 keyutils-1.6.3-3.0 krb5-1.21.3-1.0 libarchive-3.7.4-1.5 libassuan-3.0.0-1.0 libcap-2.70-1.0 libcap-ng-0.8.5-2.1 libelf-0.191-4.0 libevent-2.1.12-4.1 libffi-3.4.6-1.0 libgcrypt-1.11.0-2.1 libgpg-error-1.50-1.0 libidn2-2.3.7-1.0 libisl-0.27-1.0 libksba-1.6.6-1.0 libldap-2.6.8-2.0 libmpc-1.3.1-2.0 libnghttp2-1.63.0-1.0 libnghttp3-1.5.0-1.0 libnsl-2.0.1-1.0 libp11-kit-0.25.3-1.0 libpsl-0.21.5-2.1 libsasl-2.1.28-5.0 libseccomp-2.5.5-3.0 libsecret-0.20.5-2.0 libssh2-1.11.0-1.0 libsysprof-capture-3.48.0-4.0 libtasn1-4.19.0-2.0 libtirpc-1.3.5-1.0 libtool-2.5.2+r1+g2fe3a3e2-1.0 libunistring-1.2-1.0 libusb-1.0.27-1.0 libverto-0.3.2-5.0 libxcrypt-4.4.36-2.0 libxml2-2.13.3-1.0 linux-api-headers-6.10-1.1 lmdb-0.9.33-1.0 lz4-1:1.10.0-2.0 m4-1.4.19-3.0 make-4.4.1-2.0 mpfr-4.2.1-4.1 ncurses-6.5-3.0 nettle-3.10-1.1 npth-1.7-1.0 openssl-3.3.1-1.1 p11-kit-0.25.3-1.0 pacman-6.1.0-3.6 pacman-mirrorlist-20240616-1.3 pam-1.6.1-3.0 pambase-20230918-2.0 patch-2.7.6-10.0 pcre2-10.44-1.1 perl-5.40.0-1.0 pinentry-1.3.1-5.5 pkgconf-1.8.1-1.0 readline-8.2.013-1.0 sed-4.9-3.0 shadow-4.16.0-1.0 sqlite-3.46.1-1.0 sudo-1.9.15.p5-2.0 systemd-libs-256.5-1.0 tar-1.35-2.0 texinfo-7.1-2.0 tpm2-tss-4.0.1-1.0 tzdata-2024a-2.1 util-linux-2.40.2-1.1 util-linux-libs-2.40.2-1.1 which-2.21-6.2 xz-5.6.2-1.2 zlib-1:1.3.1-2.0 zstd-1.5.6-1.2 base-devel-1-1.1 Total Installed Size: 801.19 MiB :: Proceed with installation? [Y/n] checking keyring... checking package integrity... loading package files... checking for file conflicts... :: Processing package changes... installing archlinux32-keyring... call to execv failed (No such file or directory) error: command failed to execute correctly installing linux-api-headers... installing tzdata... Optional dependencies for tzdata bash: for tzselect [pending] glibc: for zdump, zic [pending] installing iana-etc... installing filesystem... installing glibc... Optional dependencies for glibc gd: for memusagestat perl: for mtrace [pending] installing gcc-libs... installing ncurses... Optional dependencies for ncurses bash: for ncursesw6-config [pending] installing readline... installing bash... Optional dependencies for bash bash-completion: for tab completion installing gmp... installing mpfr... installing gawk... installing m4... installing diffutils... installing gdbm... installing db5.3... installing libxcrypt... installing perl... installing autoconf... installing automake... installing jansson... installing bzip2... installing acl... installing attr... installing zlib... installing sqlite... installing util-linux-libs... Optional dependencies for util-linux-libs python: python bindings to libmount installing e2fsprogs... Optional dependencies for e2fsprogs lvm2: for e2scrub util-linux: for e2scrub [pending] smtp-forwarder: for e2scrub_fail script installing keyutils... installing openssl... Optional dependencies for openssl ca-certificates [pending] perl [installed] installing libsasl... installing libldap... installing libevent... Optional dependencies for libevent python: event_rpcgen.py installing libverto... installing lmdb... installing krb5... installing libtirpc... installing pambase... installing libcap-ng... installing audit... Optional dependencies for audit libldap: for audispd-zos-remote [installed] sh: for augenrules [installed] installing libnsl... installing libgpg-error... installing libgcrypt... installing lz4... installing xz... installing zstd... installing systemd-libs... installing pam... installing libcap... installing coreutils... installing findutils... installing libffi... installing libtasn1... installing libp11-kit... installing p11-kit... installing ca-certificates-utils... installing ca-certificates-mozilla... installing ca-certificates... installing brotli... installing libunistring... installing libidn2... installing libnghttp2... installing libnghttp3... installing libpsl... installing libssh2... installing curl... installing libelf... installing binutils... Optional dependencies for binutils debuginfod: for debuginfod server/client functionality installing icu... installing libxml2... Optional dependencies for libxml2 python: Python bindings installing gettext... Optional dependencies for gettext git: for autopoint infrastructure updates installing bison... installing debugedit... installing sed... installing libseccomp... installing file... installing shadow... installing util-linux... Optional dependencies for util-linux words: default dictionary for look installing fakeroot... installing flex... installing libmpc... installing libisl... installing gcc... Optional dependencies for gcc gcc-libs: for generating code for 32-bit ABI [installed] installing pcre2... Optional dependencies for pcre2 sh: for pcre2-config [installed] installing grep... installing groff... Optional dependencies for groff netpbm: for use together with man -H command interaction in browsers psutils: for use together with man -H command interaction in browsers libxaw: for gxditview perl-file-homedir: for use with glilypond installing gzip... Optional dependencies for gzip less: zless support util-linux: zmore support [installed] diffutils: zdiff/zcmp support [installed] installing tar... installing libtool... installing gc... installing guile... installing make... installing libarchive... installing libsysprof-capture... installing glib2... Optional dependencies for glib2 gvfs: most gio functionality libelf: gresource inspection tool [installed] python: gdbus-codegen, glib-genmarshal, glib-mkenums, gtester-report installing libassuan... installing nettle... installing gnutls... Optional dependencies for gnutls tpm2-tss: support for TPM2 wrapped keys [pending] installing libksba... installing libusb... installing json-c... installing tpm2-tss... installing libsecret... Optional dependencies for libsecret org.freedesktop.secrets: secret storage backend installing pinentry... Optional dependencies for pinentry gcr: GNOME backend gtk3: GTK backend qt5-x11extras: Qt5 backend kwayland5: Qt5 backend kguiaddons: Qt6 backend kwindowsystem: Qt6 backend installing npth... installing gnupg... Optional dependencies for gnupg pcsclite: for using scdaemon not with the gnupg internal card driver installing gpgme... installing pacman-mirrorlist... installing pacman... Optional dependencies for pacman perl-locale-gettext: translation support in makepkg-template installing patch... Optional dependencies for patch ed: for patch -e functionality installing pkgconf... installing sudo... installing texinfo... Optional dependencies for texinfo perl-archive-zip: EPUB file output via texi2any installing which... installing base-devel... :: Running post-transaction hooks... (1/3) Rebuilding certificate stores... (2/3) Warn about old perl modules (3/3) Updating the info directory file... Initializing machine ID from random generator. Generating locales... C.UTF-8... done en_US.UTF-8... done de_DE.UTF-8... done Generation complete. ==> Building in chroot for [extra-staging-with-build-support] (i486)... ==> Synchronizing chroot copy [/var/lib/archbuild/extra-staging-with-build-support-i486/root] -> [build]...done ==> Making package: perl-file-rsyncp 0.76-6.0 (Thu Sep 5 14:44:48 2024) ==> Retrieving sources... -> Found File-RsyncP-0.76.tar.gz -> Found gcc12.patch ==> Validating source files with sha512sums... File-RsyncP-0.76.tar.gz ... Passed gcc12.patch ... Passed gpg: Warning: using insecure memory! ==> Appending keys from archlinux32.gpg... gpg: Warning: using insecure memory! gpg: Warning: using insecure memory! gpg: Warning: using insecure memory! gpg: Warning: using insecure memory! gpg: Warning: using insecure memory! gpg: Warning: using insecure memory! gpg: Warning: using insecure memory! gpg: Warning: using insecure memory! gpg: Warning: using insecure memory! gpg: Warning: using insecure memory! gpg: Warning: using insecure memory! gpg: Warning: using insecure memory! gpg: Warning: using insecure memory! gpg: Warning: using insecure memory! ==> Updating trust database... gpg: Warning: using insecure memory! gpg: next trustdb check due at 2024-11-09 ==> Making package: perl-file-rsyncp 0.76-6.0 (Thu Sep 5 14:45:08 2024) ==> Checking runtime dependencies... ==> Checking buildtime dependencies... ==> Retrieving sources... -> Found File-RsyncP-0.76.tar.gz -> Found gcc12.patch ==> WARNING: Skipping all source file integrity checks. ==> Extracting sources... -> Extracting File-RsyncP-0.76.tar.gz with bsdtar ==> Starting prepare()... File FileList/configure is read-only; trying to patch anyway patching file FileList/configure ==> Starting build()... Checking if your kit is complete... Looks good Writing MYMETA.yml and MYMETA.json Writing MYMETA.yml and MYMETA.json Generating a Unix-style Makefile Writing Makefile for File::RsyncP Writing MYMETA.yml and MYMETA.json cp lib/File/RsyncP/FileIO.pm blib/lib/File/RsyncP/FileIO.pm cp lib/File/RsyncP.pm blib/lib/File/RsyncP.pm make[1]: Entering directory '/build/perl-file-rsyncp/src/File-RsyncP-0.76/Digest' cp Digest.pm ../blib/lib/File/RsyncP/Digest.pm AutoSplitting ../blib/lib/File/RsyncP/Digest.pm (../blib/lib/auto/File/RsyncP/Digest) Running Mkbootstrap for Digest () chmod 644 "Digest.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- Digest.bs ../blib/arch/auto/File/RsyncP/Digest/Digest.bs 644 "/usr/bin/perl" "/usr/share/perl5/core_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/core_perl/ExtUtils/typemap' -typemap '/build/perl-file-rsyncp/src/File-RsyncP-0.76/Digest/typemap' Digest.xs > Digest.xsc mv Digest.xsc Digest.c cc -c -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/include/db5.3 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -march=i486 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -g -ffile-prefix-map=/build/perl/src=/usr/src/debug/perl -DVERSION=\"0.76\" -DXS_VERSION=\"0.76\" -fPIC "-I/usr/lib/perl5/5.40/core_perl/CORE" -DPERL_BYTEORDER=1234 Digest.c cc -c -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/include/db5.3 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -march=i486 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -g -ffile-prefix-map=/build/perl/src=/usr/src/debug/perl -DVERSION=\"0.76\" -DXS_VERSION=\"0.76\" -fPIC "-I/usr/lib/perl5/5.40/core_perl/CORE" -DPERL_BYTEORDER=1234 md4c.c cc -c -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/include/db5.3 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -march=i486 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -g -ffile-prefix-map=/build/perl/src=/usr/src/debug/perl -DVERSION=\"0.76\" -DXS_VERSION=\"0.76\" -fPIC "-I/usr/lib/perl5/5.40/core_perl/CORE" -DPERL_BYTEORDER=1234 rsync_lib.c rm -f ../blib/arch/auto/File/RsyncP/Digest/Digest.so cc -shared -Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,-z,pack-relative-relocs -L/usr/lib/db5.3 -fstack-protector-strong Digest.o md4c.o rsync_lib.o -o ../blib/arch/auto/File/RsyncP/Digest/Digest.so \ \ chmod 755 ../blib/arch/auto/File/RsyncP/Digest/Digest.so Manifying 1 pod document make[1]: Leaving directory '/build/perl-file-rsyncp/src/File-RsyncP-0.76/Digest' make[1]: Entering directory '/build/perl-file-rsyncp/src/File-RsyncP-0.76/FileList' cp FileList.pm ../blib/lib/File/RsyncP/FileList.pm AutoSplitting ../blib/lib/File/RsyncP/FileList.pm (../blib/lib/auto/File/RsyncP/FileList) Running Mkbootstrap for FileList () chmod 644 "FileList.bs" "/usr/bin/perl" -MExtUtils::Command::MM -e 'cp_nonempty' -- FileList.bs ../blib/arch/auto/File/RsyncP/FileList/FileList.bs 644 "/usr/bin/perl" "/usr/share/perl5/core_perl/ExtUtils/xsubpp" -typemap '/usr/share/perl5/core_perl/ExtUtils/typemap' -typemap '/build/perl-file-rsyncp/src/File-RsyncP-0.76/FileList/typemap' FileList.xs > FileList.xsc mv FileList.xsc FileList.c ./configure configure: Configuring File::RsyncP::FileList based on rsync 2.6.3 checking build system type... i486-pc-linux-gnu checking host system type... i486-pc-linux-gnu checking target system type... i486-pc-linux-gnu checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for a BSD-compatible install... /usr/bin/install -c checking whether to include debugging symbols... yes checking for remsh... 0 checking for broken largefile support... no checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... 64 checking for _LARGE_FILES value needed for large files... no checking ipv6 stack type... linux-glibc checking for library containing getaddrinfo... none required checking whether to call shutdown on all sockets... no checking whether byte ordering is bigendian... no checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking whether time.h and sys/time.h may both be included... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking for ANSI C header files... no checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking sys/fcntl.h usability... yes checking sys/fcntl.h presence... yes checking for sys/fcntl.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/unistd.h usability... yes checking sys/unistd.h presence... yes checking for sys/unistd.h... yes checking for unistd.h... (cached) yes checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking grp.h usability... yes checking grp.h presence... yes checking for grp.h... yes checking compat.h usability... no checking compat.h presence... no checking for compat.h... no checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking for sys/wait.h... (cached) yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/filio.h usability... no checking sys/filio.h presence... no checking for sys/filio.h... no checking for string.h... (cached) yes checking for stdlib.h... (cached) yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/mode.h usability... no checking sys/mode.h presence... no checking for sys/mode.h... no checking sys/un.h usability... yes checking sys/un.h presence... yes checking for sys/un.h... yes checking glob.h usability... yes checking glob.h presence... yes checking for glob.h... yes checking mcheck.h usability... yes checking mcheck.h presence... yes checking for mcheck.h... yes checking arpa/inet.h usability... yes checking arpa/inet.h presence... yes checking for arpa/inet.h... yes checking arpa/nameser.h usability... yes checking arpa/nameser.h presence... yes checking for arpa/nameser.h... yes checking netdb.h usability... yes checking netdb.h presence... yes checking for netdb.h... yes checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking float.h usability... yes checking float.h presence... yes checking for float.h... yes checking whether sys/types.h defines makedev... no checking sys/mkdev.h usability... no checking sys/mkdev.h presence... no checking for sys/mkdev.h... no checking sys/sysmacros.h usability... yes checking sys/sysmacros.h presence... yes checking for sys/sysmacros.h... yes checking for int... yes checking size of int... 4 checking for long... yes checking size of long... 4 checking for short... yes checking size of short... 2 checking for inline... inline checking return type of signal handlers... void checking for uid_t in sys/types.h... yes checking for mode_t... yes checking for off_t... yes checking for size_t... yes checking for pid_t... yes checking type of array argument to getgroups... int checking for struct stat.st_rdev... yes checking for ino_t... yes checking for errno in errno.h... yes checking for connect... yes checking for inet_ntop in -lresolv... yes checking for inet_ntop... yes checking for inet_pton... yes checking whether defines needed by getaddrinfo exist... yes checking for getaddrinfo... yes checking for getnameinfo... yes checking for struct sockaddr.sa_len... no checking for struct sockaddr_in.sin_len... no checking struct sockaddr_storage... yes checking for struct sockaddr_in6.sin6_scope_id... yes checking for strcasecmp... yes checking whether utime accepts a null argument... no checking for working alloca.h... yes checking for alloca... yes checking for waitpid... yes checking for wait4... yes checking for getcwd... yes checking for strdup... yes checking for strerror... yes checking for chown... yes checking for chmod... yes checking for mknod... yes checking for mkfifo... yes checking for fchmod... yes checking for fstat... yes checking for strchr... yes checking for readlink... yes checking for link... yes checking for utime... yes checking for utimes... yes checking for strftime... yes checking for mtrace... yes checking for ftruncate... yes checking for memmove... yes checking for lchown... yes checking for vsnprintf... yes checking for snprintf... yes checking for asprintf... yes checking for setsid... yes checking for glob... yes checking for strpbrk... yes checking for strlcat... yes checking for strlcpy... yes checking for strtol... yes checking for mallinfo... yes checking for getgroups... yes checking for setgroups... yes checking for geteuid... yes checking for getegid... yes checking for open64... yes checking for mkstemp64... yes checking for working socketpair... no checking for long long... no checking for off64_t... no checking for short ino_t... no checking for unsigned char... no checking for broken readdir... no checking for utimbuf... no checking if gettimeofday takes tz argument... no checking for C99 vsnprintf... no checking for secure mkstemp... no checking for broken inet_ntoa... yes checking for broken inet_aton... yes checking whether -c -o works... yes configure: creating ./config.status config.status: creating config.h File::RsyncP::FileList based on rsync 2.6.3 configuration successful cc -c -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/include/db5.3 -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -march=i486 -mtune=generic -O2 -pipe -fno-plt -fexceptions -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security -fstack-clash-protection -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer -g -ffile-prefix-map=/build/perl/src=/usr/src/debug/perl -DVERSION=\"0.76\" -DXS_VERSION=\"0.76\" -fPIC "-I/usr/lib/perl5/5.40/core_perl/CORE" -DPERL_BYTEORDER= FileList.c In file included from FileList.xs:5: rsync.h:361:16: error: expected ‘:’, ‘,’, ‘;’, ‘}’ or ‘__attribute__’ before ‘inode’ 361 | uint64 inode; | ^~~~~ rsync.h:516:16: error: expected ‘:’, ‘,’, ‘;’, ‘}’ or ‘__attribute__’ before ‘dev’ 516 | uint64 dev; | ^~~ FileList.xs: In function ‘XS_File__RsyncP__FileList_get’: FileList.xs:222:23: error: ‘struct file_list’ has no member named ‘link_idev_data_done’ 222 | if ( flist->link_idev_data_done ) { | ^~ In file included from /usr/lib/perl5/5.40/core_perl/CORE/perl.h:6225, from FileList.xs:2: FileList.xs:242:69: error: ‘struct idev’ has no member named ‘dev’ 242 | hv_store(rh, "dev", 3, newSVnv(file->link_u.idev->dev), 0); | ^~ /usr/lib/perl5/5.40/core_perl/CORE/embed.h:293:86: note: in definition of macro ‘hv_common_key_len’ 293 | # define hv_common_key_len(a,b,c,d,e,f) Perl_hv_common_key_len(aTHX_ a,b,c,d,e,f) | ^ FileList.xs:242:21: note: in expansion of macro ‘hv_store’ 242 | hv_store(rh, "dev", 3, newSVnv(file->link_u.idev->dev), 0); | ^~~~~~~~ FileList.xs:242:44: note: in expansion of macro ‘newSVnv’ 242 | hv_store(rh, "dev", 3, newSVnv(file->link_u.idev->dev), 0); | ^~~~~~~ FileList.xs:244:50: error: ‘struct idev’ has no member named ‘inode’ 244 | newSVnv(file->link_u.idev->inode), 0); | ^~ /usr/lib/perl5/5.40/core_perl/CORE/embed.h:293:86: note: in definition of macro ‘hv_common_key_len’ 293 | # define hv_common_key_len(a,b,c,d,e,f) Perl_hv_common_key_len(aTHX_ a,b,c,d,e,f) | ^ FileList.xs:243:21: note: in expansion of macro ‘hv_store’ 243 | hv_store(rh, "inode", 5, | ^~~~~~~~ FileList.xs:244:25: note: in expansion of macro ‘newSVnv’ 244 | newSVnv(file->link_u.idev->inode), 0); | ^~~~~~~ FileList.xs: In function ‘XS_File__RsyncP__FileList_encode’: FileList.xs:327:22: error: ‘struct file_list’ has no member named ‘encode_lastdir_len’ 327 | flist->encode_lastdir_len = -1; | ^~ FileList.xs:345:22: error: ‘struct file_list’ has no member named ‘encode_lastdir_len’ 345 | if (flist->encode_lastdir_len == dirname_len - 1 | ^~ FileList.xs:346:47: error: ‘struct file_list’ has no member named ‘encode_lastdir’ 346 | && strncmp(thisname, flist->encode_lastdir, | ^~ FileList.xs:347:41: error: ‘struct file_list’ has no member named ‘encode_lastdir_len’ 347 | flist->encode_lastdir_len) == 0) { | ^~ FileList.xs:348:32: error: ‘struct file_list’ has no member named ‘encode_lastdir’ 348 | dirname = flist->encode_lastdir; | ^~ rsync.h:409:28: error: ‘struct idev’ has no member named ‘dev’ 409 | #define F_DEV link_u.idev->dev | ^~ FileList.xs:400:19: note: in expansion of macro ‘F_DEV’ 400 | file->F_DEV = getHashDouble(data, "dev", 0.0); | ^~~~~ rsync.h:410:28: error: ‘struct idev’ has no member named ‘inode’ 410 | #define F_INODE link_u.idev->inode | ^~ FileList.xs:401:19: note: in expansion of macro ‘F_INODE’ 401 | file->F_INODE = getHashDouble(data, "inode", 0.0); | ^~~~~~~ FileList.xs:405:34: error: ‘struct file_list’ has no member named ‘encode_lastdir’ 405 | file->dirname = flist->encode_lastdir = bp; | ^~ FileList.xs:406:18: error: ‘struct file_list’ has no member named ‘encode_lastdir_len’ 406 | flist->encode_lastdir_len = dirname_len - 1; | ^~ FileList.xs: In function ‘XS_File__RsyncP__FileList_exclude_list_clear’: FileList.xs:544:34: error: ‘struct file_list’ has no member named ‘exclude_list’ 544 | clear_exclude_list(&flist->exclude_list); | ^~ FileList.xs: In function ‘XS_File__RsyncP__FileList_exclude_list_get’: FileList.xs:558:29: error: ‘struct file_list’ has no member named ‘exclude_list’ 558 | for (ent = flist->exclude_list.head; ent; ent = ent->next) { | ^~ make[1]: *** [Makefile:350: FileList.o] Error 1 make[1]: Leaving directory '/build/perl-file-rsyncp/src/File-RsyncP-0.76/FileList' make: *** [Makefile:498: subdirs] Error 2 ==> ERROR: A failure occurred in build(). Aborting... ==> ERROR: Build failed, check /var/lib/archbuild/extra-staging-with-build-support-i486/build/build used straw: :with_build_support:clean_chroot: build@eurobuild6-7-i486